The Woodcutters Helper

Firewood Measuring Attachments for your chainsaw

Woodcutters Helper 12″ Version

The 12″ version of the Woodcutters Helper™ is a simple and effective time saving tool for measuring firewood as you saw, or it can be used as a guide for ripping rough cut lumber.

A common misconception is that a chainsaw firewood measuring accessory needs to be at least as long as the firewood you require. By setting the indicator at half the length desired, it’s possible to achieve accurate results for any length of firewood.

To adjust the 12″ version, attach the end of a measuring tape to the magnet and set the indicator for half the length you require and complete your cut at the second mark.

For example: 16 inch firewood can be measured by setting the indicator at 8 inches. (The excess rod, if desired, could then be removed making the tool even shorter and lighter)

As you work down the log, nick the bark (with the chainsaw) at the first mark (8 inches) then line-up the indicator with the nick/mark in the bark and complete your cut at the second mark; 16 inches. For 20″ firewood set the indicator at 10″ and so on.

View various version of this nifty time saver from the above menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hook the clip to your belt loop or pocket and then use the magnet to attach the tool to the clip. It hangs from the clip within easy reach. (The free spring clip may vary in type and design depending on available stock).

Ripping: The Woodcutters Helper is the first to utilize the Rare Earth Neodymium Magnet as a mounting option coupled with an adjustable rod and length/width indicator. Its versatility can be utilized to not only measure firewood but to also rip lumber into boards (with a chainsaw) from 12″ wide down to – an inch wide, (the board should be securely clamped to your pickup tailgate or a table prior to ripping). Just set the indicator for the width of board you require, lineup the indicator along the edge of the board and begin to rip watching the indicator to be sure its following the outer edge of the board. A well sharpened chain will improve results. (The indicator can quickly and easily be adjusted to the length or width required by inserting the rod/extension into a cordless/drill and while holding the thumb-nuts run the drill; in the correct direction.) Once you have the indicator set exactly where you want it, lock down the thumb-nuts and no further adjustment should be necessary unless you wish to change the length of firewood desired or to rip lumber.

Indicator, thumb-nuts and rod are rust and corrosion resistant.

Watch a short demo

This demo is of the original Woodcutters Helper and is for illustration only.


The Woodcutters Helper 12″ version only $18.00, includes free shipping within the U.S.




We want you to be completely satisfied with your purchase, please do not hesitate to contact us with any questions or to inquire about quantity discounts.

Return policy: This item may be returned undamaged (with purchase price fully refunded) in original shipping container within 14 days of receiving the item. Buyer pays return shipping.


As the creator and manufacturer of the Woodcutters Helper we have the ability and reserved the option to change configurations regarding magnetic pull force and dimension or material of the measuring rod and indicator. The original Woodcutters Helper utilized a neodymium magnet with a rated pull force of 48.5 lbs. connected to a zinc plated all-thread steel rod and along with this 12″ version and the 16″ nylon version is recommended for its durability. The 12″ version available from this listing uses the same magnet and extension/rod but due to the shorter length is extremely stable on the chainsaw bar.

Disclaimer: In no event shall IMT/imtusa, ChainsawAccessories.biz/WoodcuttersHelper.com, owners, employees or affiliates be liable for any direct, indirect, or consequential damages whatsoever arising out of or in connection with the use of any product or content posted on this listing/site. The use of any product sold from this listing/site is at the sole discretion of the user and safe-operating procedures should be strictly adhered to. By ordering any product from this listing/site you agree to use the product at your own risk.

Please Saw Safe!

© 2012-2017